• Jespersen Zhu posted an update 2 years, 3 months ago

    Your floors need special protection when undergoing remodeling, during new construction, moving heavy furniture or equipment, as well as other events beyond day-to-day use. Protecting flooring is practical and saves money. A spill of paint, the drop of your hammer, a scratch from heavy furniture could cost lots of money in replacement and repairs. This article describes surface protection products for floors to help you make informed choices on the most effective product for your needs. Types of Protection Packaging:

    Floor protection items are commonly packaged as either:

    (1) Products with the roll: Included in this are common adhesive films, rolled paper products and rolled textile protection. Protective materials purchased from the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick up to 48 mils thick).

    (2) Products by the sheet: These include corrugated plastic, masonite, along with other rigid protection. Protective materials purchased with the sheet can be measured in depth by the inch (e.g., 1/4-inch thick) and normally come as 4 feet by 8 feet.

    Paper protection works for many hard surfaces and resilient surfaces but does not work well to protect carpets as it could tear when flexing under footsteps. Paper products are breathable so that glue fumes and cement curing vapors can escape. One disadvantage to paper products since they require tapes to secure the crooks to flooring and tapes could leave adhesive residue when removed. Common paper protection products include:

    Polyethylene (PE) films can be purchased as self adhesive rolled films varying from 2.0 approximately 3.5 mils in depth. They trap any moisture from escaping so that they mustn’t be used on any floors which might be curing. A couple of the wonderful benefits of polyethylene films are that films will flex and contour so they can supply on carpets as well as hard surfaces. These films don’t offer any impact protection and therefore are normally rated for short term using 30 to 3 months only. Polyethylene films are designed for one-time use and never use recycled materials making them a poor choice in sustainable protection. Protection films are available in many different adhesion "tack". Hard surface protection films may lower tack and color than carpet protection which wants a more aggressive glue to hold onto carpet successfully.

    Plywood and Masonite are commonly utilized as protection on commercial projects with many different foot traffic. Masonite is a wood product made out of wood fibers unlike plywood that’s a real sheet of thin wood. Both plywood and Masonite are sold inside the standard height and width of 4 feet by 8 feet and therefore are costlier per square feet than paper or polyethylene products. Masonite is often 1/8 or 1/4 inch thick. Plywood is often 1/4 inch to 3/4 inch thick. Both products provide impact protection on the various floor types and provide adequate protection against heavy equipment use or furniture moving. Both plywood and Masonite are breathable and reusable however they are bulky to hold and store. These wood sheets must be used on top of a softer protection like a rolled textile as they easily scratch flooring. These sheets work nicely to protect carpet since they prevent wrinkles when rolling heavy loads over the carpet. Plywood and Masonite tend not to offer moisture protection and can be harder to chop to size than other protection types.

    Textile products are commonly manufactured from recycled cloth. Moreover, these rolled protection products usually have amazing benefits including skid resistant backings or breathable plastic liners. For wooden floors, these specialty textile rolls are recommended as they are breathable, skid resistant, reusable, often leakproof and easy to cut to size.

    More info about

    temporary carpet protection you can check this popular site